GROUND WATER EXPLORATION

Disposition of Aquifer System

Field Study under NAQUIM

Evaluation of NAQUIM Through Expert Committee


Drought-proofing through aquifer storage in Australia

Drought-proofing does not mean preventing every dry year. It means protecting essential supplies, reducing exposure to sudden allocation cuts and recovering quickly when rainfall returns. Aquifer storage can support that goal by using suitable groundwater systems as managed reserves, provided the water recharged is lawful, fit for purpose and genuinely recoverable.

The approach is commonly called managed aquifer recharge: surplus water is infiltrated through engineered or landscape features, then recovered through appropriately licensed wells. Unlike a surface dam, it can make use of groundwater below the land surface with little evaporation, provided site conditions are suitable. It complements dams, reservoirs and recycled water rather than replacing them.

A workable plan must connect hydrogeology with water law, farm and household demand, environmental limits and actual institutions. This matters in Australia, where groundwater rules differ across states and territories, while the Murray–Darling Basin also has interstate arrangements. A reservoir may look generous on paper yet fail if recharge water cannot legally be used later or recovery causes unacceptable impacts on connected waterways.

Understand what aquifer storage can deliver

Think of aquifer storage as deliberately placing surplus water into an aquifer and allowing it to recover later. Methods include infiltration basins, sand-and-gravel recharge beds, riverbed infiltration and managed aquifer recharge. Where recharge and recovery wells are paired, projects are commonly called aquifer storage and recovery. Water may come from wet-period flows, treated runoff or a recycled-water network. The objective is a usable reserve, not simply wetter soil.

Storage potential depends on geology, recharge rate, recovery time and water quality. A porous alluvial aquifer may accept and release water quickly; a fractured rock aquifer may hold useful volumes but respond slowly. Total pore space is not recoverable supply. Planning must estimate how much water can be withdrawn without lowering neighbouring wells, drawing saline water or harming springs, wetlands and streams.

Local geology changes the design. The Great Artesian Basin’s deep sandstone aquifers sustain pastoral industries and town supplies, including around Coonamble, but are not automatically suitable for rapid recharge. Long-term pressure decline, coordinated borewater management and groundwater-dependent ecosystems require careful safeguards. A Murray–Darling alluvial aquifer behaves differently: river and groundwater levels interact closely, so recharge that captures floods can reduce streamflow if poorly controlled.

Build a hydrogeological and water-demand baseline

Start with a shared hydrogeological baseline. Aquifer mapping should cover boundaries, depth, storage capacity, transmissivity, salinity, recharge sources and barriers, then compare water levels with rainfall, streamflow and historical use. Combine state monitoring, council bore records, properly permitted private data, satellite observations and local knowledge. Give each bore a consistent identifier so changes can be tracked instead of rebuilding a picture after every drought.

Model several dry-year sequences rather than a single average year. Estimate recharge, pumping, environmental requirements and recoverable volume under each scenario, including the time needed for water levels to rebound. Groundwater models should be stress-tested against observed data and updated when new logs or monitoring show that assumptions were wrong.

India offers a useful public-sector comparison rather than a template to copy. The Central Ground Water Board’s aquifer information portal provides hydrogeological information for exploration by state, district and block under the National Project on Aquifer Management programme. The transferable lesson is to connect hydrogeological mapping with decisions; Australian ownership, water law and market institutions must still determine each project.

Set measurable goals and drought triggers

Define service outcomes before selecting infrastructure: how much water must remain available for households, stock, irrigation and ecosystems; what quality is required; and how quickly supply must respond. A storage target should mean usable water at an agreed place and time, not the largest volume physically placed underground.

Option Main drought benefit Main strengths Key limits and safeguards
Surface dams Provides a visible, rapid reserve during dry periods Well-understood operation; familiar to water users High evaporation; land requirements; ecological and inundation impacts
Managed aquifer recharge Stores water below ground for later recovery Low evaporation; can use suitable landscapes Site constraints; slow recovery; water-quality monitoring
Aquifer pumping and recovery Uses stored groundwater when surface supplies are stressed Can respond quickly; supports existing users Drawdown; well interference; energy costs; ecosystem damage
Demand management and reuse Reduces reliance on new extraction Can begin quickly; supports existing supply chains Behaviour change; treatment costs; does not recharge by itself

A blended portfolio usually performs better than a single asset. Set transparent triggers around rainfall forecasts, aquifer levels, salinity, streamflow and ecological conditions. A watch stage can protect recharge opportunities and tighten monitoring; a protection stage can shift pumping, expand demand restrictions and activate recovery wells; a recovery stage can rebuild reserves. Pre-agreed rules reduce argument during dry weather and distinguish temporary balancing from permanent changes to entitlement.

Design projects around local conditions

Select sites using hydrogeology, land availability, infrastructure and water quality, not just proximity to demand. Natural wetlands may support recharge, but they are not automatically efficient reservoirs; engineered beds can improve infiltration where soils permit. Mapping is not proof of recharge performance, because salinity, contamination and shallow barriers still require site testing. Check nearby wells for interference and establish baseline ecological conditions before works begin.

Perth’s Gnangara managed aquifer shows why urban recharge must sit within land-use planning. Development, industrial contamination and salinity affect how much water can be stored and recovered. Treated stormwater can ease pressure where quality and systems permit, but allocation limits and environmental objectives still govern the outcome.

Across the Murray–Darling Basin, including the Riverland in South Australia and northern Victoria, irrigation allocations, private bore licences and purchases through water brokers shape farm decisions. Agreements should state who pays for recharge, who may recover the water and how temporary transfers are unwound without damaging third-party rights.

Coordinate water rights, finance and community

Build governance around existing responsibilities. State water agencies and local councils usually control allocation and bore licensing, while catchment authorities, water trusts, irrigators and Traditional Owners have essential roles. In Queensland and New South Wales, groundwater management plans can coordinate local use. Traditional Owner rights and cultural water needs must shape siting and operations, not follow as an afterthought.

Fund the full lifecycle: land, infiltration works, pipelines, treatment, monitoring, licence administration and decommissioning. Compare schemes across multiple dry-year scenarios and include ecological impacts and lost alternatives, not merely the cheapest water price. Staged pilots reduce exposure where geology is uncertain. Recycled-water purchases can create additional recharge, but only if a lawful route connects supply, aquifer and end user.

Adelaide’s dry summers and household demand make recycled-water networks, industrial agreements and leakage reduction valuable complements to storage. These measures reduce pressure on stressed aquifers and leave more room for environmental recovery. Rainwater tanks remain common across Australia for non-potable use, but they do not replenish groundwater without suitable land and recharge controls.

Activate, monitor and sustain the plan

Deliver the plan in stages: establish the baseline, consult affected communities, pilot a small site, observe recovery, then expand only if monitoring supports the design. Appoint a lead agency and a cross-sector reference group. Record approvals, assumptions and performance indicators in a public implementation register so agencies, landholders and investors can see progress.

Monitor groundwater levels, salinity, recharge volume, recovery efficiency, drawdown at neighbouring wells, streamflow and ecosystem condition. Report the results in plain language and publish them during operations, not only after the project ends. Set review dates after each drought and independent checks when risks, such as salinity migration or ecological damage, emerge.

Connect triggers to specific actions. When conditions tighten, suspend discretionary pumping, deliver pre-purchased recycled water to high-priority users, activate recharge and recovery infrastructure, and communicate allocation decisions through established local channels. Keep emergency trades temporary and transparent; they cannot replace the base allocation needed to protect aquifers and ecosystems.

The immediate action is to place a drought-proofing plan based on aquifer storage before the next budget and regional water-planning cycle. Give it a named owner, a funded monitoring program, agreed activation rules and a public review date. Bring state and local agencies, Traditional Owners, landholders, water brokers and community representatives into the same process, then publish the baseline and pilot commitments.

know your aquifer


  • Achievements

    Achievements
    Click Here
  • Photo Gallery

    Photo Gallery
    Click Here
  • Video Gallery

    Video Gallery
    Click Here
  • Media Coverage

    Media Coverage
    Click Here